Internet Accelerator Instructions
  1. Once you have located the midcoast-v23.exe file. Double-click on it. Now you should see the following screen.
    • Now Click "OK."

  2. Click "Next."


  3. Click "Yes."


  4. Click "Next."


  5. Click "Finish."


  6. Once you have restarted your computer, you will probably recieve the following error. This is ok. You have this error because we have yet to configure the Venturi Client for connectivity. Now click "OK."


  7. In the bottom, right-hand corner of your screen you should see a large "V" with or without an "X" going through it. You want to "Right-Click" on it and then "Left-Click" on "Open."


  8. Once you have clicked on "Open", you should see the following screen. (NOTE: If you do not get this screen try repeating step #7. If this doesn't work please contact MIS.) Now you want to click on the "System Control" tab.


  9. Now enter in your "MIS Username" and your "Password.". (NOTE: DO NOT add @midcoast.com your username.) Once you are done doing that, click the "Protocols/Applications Tab."


  10. You will probably see this screen, simply click "Yes" and move on.


  11. Now try to match the settings on the following picture with the settings on your computer. Once you have done this please select, "Performance Tuning" and move on.


  12. You may see another window similar to step #10, just click "Yes" and continue.

  13. Now select the setting that will best suit your needs. Once you have done this select "Apply" then "OK." If you have your web-browser (I.E. Netscape, etc.) open, you will want to close out of it, and open it back up for the settings to take effect.


    If you have questions about the Venturi Client and our Internet Accelerator, please visit the Frequently Asked Questions page at: http://www.midcoast.com/mis/accelerator/faq.html