Marine
Hydraulic
Engineering
Co., Inc.


Rockland
Industrial Park
04841


207-594-9525


marinhyd
@
midcoast.com
Marine Hydraulic Engineering logo
Hydro-Slave
Super Blocks and Hanging Haulers

Hydro Slave Super Blocks are designed to be maintenance free with pre-greased sealed tapered roller bearings that don't require further greasing.
  • Rollers are pre-greased with sealed tapered roller bearings
  • Galvanized forged steel swivel hook with stainless steel grease fitting
Photo of 4 inch low lip super block.
low lip
 Photo of 4 inch high lip super block.
high lip
4" SUPER BLOCK

  • Overall block height 14-1/2"
  • Width of roller 2-7/8"
  • Height, hanging point to warp 8-1/2"
  • Capacity 2,000 lbs.
  • Sheave, aluminum or stainless steel
Photo of 5 inch low lip super block.
low lip
 Photo of 5inch high lip super block.
high lip
5" SUPER BLOCK
AVAILABLE WITH STAINLESS STEEL ROLLER ONLY
  • Overall block height 16"
  • Width of roller 5-1/2"
  • Height, hanging point to warp 9-3/4"
  • Capacity 2,000 lbs.
  • Sheave, stainless steel-hardened in center where rope rides

HYDRO-SLAVE HANGING BLOCKS

Our haulers have a seal to protect the motor shaft from salt water. Stainless steel grease fittings allow you to be able to grease the eye hook swivel, as well as keep the motor's shaft submersed with grease, to assure no saltwater penetration to the motor's shaft.
Photo of 8 inch Hanging Hauler.
8" Hanging Hauler
Uses H series motors 101-1002 standard
Photo of 10 inch Hanging Hauler.
10" Hanging Hauler
Uses H series motors 101-1003 standard
Photo of 12 inch Hanging Hauler.
12" Hanging Hauler
Uses H series motors 101-1004 standard

Please feel free to contact us with any questions you may have regarding sales, service or repair. 800-747-7550  marinhyd@midcoast.com
Home | Hydraulic Components | Pot Haulers | Winches
Steering Systems | Hydro-Slave Blocks | New Dual Slave Steering